行业认证服务业
认证种类汽车质量管理体系认证
服务内容IATF16949汽车质量管理体系认证培训辅导
IATF16949认证IATF16949汽车质量管理体系认证
名称IATF16949汽车行业管理体系认证
IATF16949认证培训汽车质量管理体系内审员培训
IATF16949认证辅导汽车质量管理体系认证辅导
IATF16949认证咨询汽车质量管理体系认证咨询
审核材料协助准备
*资料协助整理
审核流程协助推进
价格费用优惠面议
适用标准IATF16949:2016
所需资料协助整理
PDCA cycle and risk-based thinking, to align or integrate its quality management system with the
requirements of other management system standards.本标准使组织能够使用过程方法，并结合PDCA
循环和基于风险的思维，将其质量管理体系与其他管理体系标准要求进行协调或整合。
This International Standard relates to ISO 9000 and ISO 9004 as follows:本标准与ISO 9000和ISO 9004
IATF16949：2016
存在如下关系：
— ISO 9000 Quality management systems — Fundamentals and vocabulary provides essential
background for the proper understanding and implementation of this International Standard;ISO
2 Normative references 规范性引用文件
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.下列文
件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日
期的引用文件，其新版本（包括所有的修）适用于本文件。
ISO 9000:2015, Quality management systems — Fundamentals and vocabulary ISO 9000：2015 质量管理体
系 基础和术语
Challenge (master) part 挑战（原版）件
Part(s) of known specification, calibrated and traceable to standards, with expected results(pass or fail)
that are used to validate the functionality of an error-proofing device or check fixtures( e.g., go/no-go
gauging)具有已知规范、经校准并且可追溯到标准的零件，其预期结果（通过或不通过）用于确认防
错装置或检具（如通止规）的功能性。
Design for assembly (DFA) 装配设计(DFA)
Process by which products are designed with ease of assembly considerations. (e.g., if a product contains
fewer parts it will take less time to assemble, thereby reducing assembly costs)
出于便于装配的考虑设计产品的过程。（例如，若产品含有较少零件，产品的装配时间则较短，从而
减少装配成本。）
Customer requirements 顾客要求
all requirements specified by the customer (e.g., technical, commercial, product and manufacturing
process-related requirements, general terms and conditions, customer-specific requirements, etc.)
Where the audited organization is a vehicle manufacturer, vehicle manufacturer subsidiary,
or joint venture with a vehicle manufacturer, the relevant customer is specified by the
vehicle manufacturer, their subsidiaries, or joint ventures.
顾客要求
Periodic overhaul 周期性检修
maintenance methodology to prevent a major unplanned breakdown where, based on fault or
interruption history, a piece of equipment, or subsystem of the equipment, is proactively taken out of
service and disassembled, repaired, parts replaced, reassembled, and then returned to service用于防止发
生重大意外故障的维护方法，此方法根据故障或中断历史，主动停止使用某一设备或设备子系统，然
后对其进行拆卸、修理、更换零件、重新装配并恢复使用
http://nbzh2010.b2b168.com
